3.2d Storage & Handling of Oxygen

Storage and Handling of Oxygen

  • Oxygen is a promoter of combustion and is stored under significant pressure. There are also hazards involved in its handling. Safe handling is very important. The rules are as follows:
  • Always follow safety and government regulations related to the storage and use of oxygen.
  • Only qualified people should handle and use oxygen equipment.
  • Make sure you undertake an appropriate course (in the safe use and administration) before using oxygen.
  • Refer to OHS regulations for advice on storage and signage regarding oxygen cylinders.
  • Cylinders should be stored in an upright but secured position on a wooden or rubber base.
  • Do not smoke or use naked flames within 25 metres of any source of oxygen.
  • Do not allow oil or grease to come in contact with the cylinder or fittings.
  • Do not use oil or grease to lubricate oxygen equipment.
  • Do not carry an oxygen cylinder by the valve.
  • Make sure the valve is closed when the cylinder is in storage, even if it is empty.
  • Check the label is visible and that the test date stamped on the cylinder is less than 10 years old.
  • Ensure damaged cylinders are reported immediately and are not used.
  • Do not allow cylinders and regulators to become dirty or rusty.
  • Keep cylinders and oxygen away from sources of all flames and heat
  • Cylinders should be stored securely in a cool, dry, shaded and well-ventilated area.
  • Do not store empty cylinders with full ones.
  • Mark the used cylinders as empty and return them promptly for refilling.
  •